# From Pioreactor to FlavorReactor

**URL:** <https://forum.amybo.org/t/from-pioreactor-to-flavorreactor/88>\
**Category:** Pioreactor\
**Created:** [6 November 2024 14:46 UTC](https://forum.amybo.org/t/from-pioreactor-to-flavorreactor/88 "2024-11-06T14:46:07Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Martin](https://forum.amybo.org/user_avatar/forum.amybo.org/martin/32/19_2.png) [@Martin](https://forum.amybo.org/u/Martin)\
**Post date:** [12 November 2024 12:01 UTC](https://forum.amybo.org/t/from-pioreactor-to-flavorreactor/88/2 "2024-11-12T12:01:49Z")

</div>

Sorry, I meant to respond to this yesterday. I started [a response on the Pioreactor forum](https://forum.pioreactor.com/t/applicability-of-pioreactor-hardware-software-for-larger-bioreactor-setups/515/7?u=martin) which then launched me into writeup of our own Pioflo Kombucha experiment & setting up [Pioflo.org](http://Pioflo.org) to redirect to it. I also started a [new thread here](https://forum.amybo.org/t/pioflo-org-enabling-affordable-bioreactors-at-scale/91) for us to discuss Pioflo.

On the FlavorReactor, I get the impression that the main impetus is to add more vial-cap space in order to add more sensors. I was very interested to see their use of [i3 InterLink | Atlas Scientific](https://atlas-scientific.com/electrical-isolation/i3-interlink/) and would definitely be getting one if they were open source, but as they are proprietary it would be difficult to customise them for our own needs. Have you come across any open source Raspberry Pi hats that could act as a sensor interface in a similar manner?

---

_[View the full topic](https://forum.amybo.org/t/from-pioreactor-to-flavorreactor/88)._