# Development **URL:** https://forum.amybo.org/c/development/14.md [Latest](https://forum.amybo.org/latest.md) · [Categories](https://forum.amybo.org/categories.md) · [Tags](https://forum.amybo.org/tags.md) --- ## [About the Development category](https://forum.amybo.org/t/about-the-development-category/26)
**Author:** [@system](https://forum.amybo.org/u/system)\ **Replies:** 0
(Replace this first paragraph with a brief description of your new category. This guidance will appear in the category selection area, so try to keep it below 200 characters.) Use the following paragraphs for a longer d… --- ## [What license should work done by Amybo be placed under?](https://forum.amybo.org/t/what-license-should-work-done-by-amybo-be-placed-under/47)
**Author:** [@RobJ](https://forum.amybo.org/u/RobJ)\ **Replies:** 25\ **Last updated:** [9 September 2026 09:20 UTC](https://forum.amybo.org/t/what-license-should-work-done-by-amybo-be-placed-under/47 "2026-09-09T09:20:08Z")
I was wondering what licenses people think are best for the work done by Amybo? As far as hardware goes, I think the CERN-OHL-P or the MIT license may be good options. CC0 1.0 or CC BY 4.0 are also worth taking a look… --- ## [Website refresh](https://forum.amybo.org/t/website-refresh/132)
**Author:** [@Amy](https://forum.amybo.org/u/Amy)\ **Replies:** 15\ **Last updated:** [16 October 2025 23:01 UTC](https://forum.amybo.org/t/website-refresh/132 "2025-10-16T23:01:42Z")
Hi all :wave: I’m Amy, I’ve volunteered to help out on the AMY.BO website refresh. I’m a data scientist with a small bit of experience in UX and a very small bit of web dev experience. I’ve started this thread to use fo… --- ## [Evaluating platinized electrodes for electrolysis](https://forum.amybo.org/t/evaluating-platinized-electrodes-for-electrolysis/71)
**Author:** [@gerrit](https://forum.amybo.org/u/gerrit)\ **Replies:** 11\ **Last updated:** [11 August 2025 11:27 UTC](https://forum.amybo.org/t/evaluating-platinized-electrodes-for-electrolysis/71 "2025-08-11T11:27:50Z")
I decided to run an experiment to test two different platinized electrodes for the in-situ electrolysis, and thought I’d write up the results. I bought a platinized titanium mesh electrode on Ebay for £8.72 and like @Ma… --- ## [Data Sharing Platform](https://forum.amybo.org/t/data-sharing-platform/124)
**Author:** [@Martin](https://forum.amybo.org/u/Martin)\ **Replies:** 3\ **Last updated:** [3 February 2025 14:39 UTC](https://forum.amybo.org/t/data-sharing-platform/124 "2025-02-03T14:39:02Z")
The Scottish Tech Army have kindly offered to try to set up a Tech for Good Alliance project to help develop our Data Sharing Platform. We’ve produced a rough scope here which we need to finalise by 7 February for them … --- ## [Alternative Anode Testing - Graphite](https://forum.amybo.org/t/alternative-anode-testing-graphite/95)
**Author:** [@Tresselle](https://forum.amybo.org/u/Tresselle)\ **Replies:** 4\ **Last updated:** [20 December 2024 16:16 UTC](https://forum.amybo.org/t/alternative-anode-testing-graphite/95 "2024-12-20T16:16:18Z")
Hello! We encountered issues connecting the Pioreactor to the internet throughout the semester. As a result, to test our original anode substitute, annealed graphite, we opted for an alternate setup to measure current d… --- ## [Bill of Materials?](https://forum.amybo.org/t/bill-of-materials/57)
**Author:** [@gerrit](https://forum.amybo.org/u/gerrit)\ **Replies:** 10\ **Last updated:** [24 April 2024 10:22 UTC](https://forum.amybo.org/t/bill-of-materials/57 "2024-04-24T10:22:25Z")
I may have missed this somewhere, but do we have a list of components needed to build the setup described in @Martin’s latest video? For example, where can I download @SandrineH’s Sodastream holder? And I…